Sub-header

ZD 30 Rotary Stage

Click image to enlarge
The ZD 30 Rotary Stage is a stepper motor based rotary stage that can be used for
  • laser engraving
  • inspection
  • as a lathe rotary stage for milling and turning

It is small, accurate and has very low backlash.   

The following accessories are available for the ZD30:

ZD30 Accessories
3 Jaw chuck 65 mm diam. 3 Jaw Chuck 80 mm diam.
3 jaw chuck, 65mm dia. 3 jaw chuck, 80mm dia.
SK20 collet holder for ER 20 Collets Tailstock and bed
SK20 collet holder accepts ER20 collets Tailstock and bed
Available in 4 lengths
3 Jaw chuck, 125 mm diam. For dimensions of tailstock and beds,
click here.
3 jaw chuck, 125mm dia.  
Configure Your Part
Select Options then Click “Add to Quote”
Part Number:
Quantity
Add To Quote
Features
  • Low play toothed belt drive with stepper motor
  • Reduction 1: 30
  • Shaft with 15 mm boring
  • Housing flange with inner cone SK 20
  • Weight 2.9 kg
  • Optional CNC controller via Sub D
 
ZD 30
  stepper motor MS 045 HT * Version Item-No. Lges L L (ZD30) L (RE-ZD30) Lw L (65) L(80)
Reduction ratio  0.0625 RE-ZD30 200 mm  269100 1060  358 209 138.5 331.5 165 97 80.5
Output speed [1/min]  0 - 40 RE-ZD30 300 mm  269100 1070  458 309 238.5 431.5 265 197 180.5
Operating torque (0 - 1600 Hz) [Nm]  12 RE-ZD30 400 mm  269100 1080  558 409 338.5 531.5 365 297 280.5
Rated holding torque (static load) [Nm]  20 RE-ZD30 500 mm  269100 1090  658 509 438.5 631.5 465 397 380.5
Min. step (positional accuracy) [arcmin]  2.5                  
Weight [kg]  2.9                  
  * Values for half-step operation                  
Rotary or tilting units 1* 2* 3 4 5 6 7
ZD 30 (step)  14 kg  8 kg  20 Nm  12 Nm  12 Nm  40 rpm  1:30
*) Guideline values will vary according to application !!

Have an Application Question? Ask Our Knowledgeable Engineers Today!

Contact Us