Sub-header

Industrial Workbench with T Slot Tabletop and Back

  • Robot Workbench with T Slots and Back
Click image to enlarge
These industrial workbenches are available in 4 standard models but are also available in custom LENGTH, WIDTH and HEIGHT - (just tell us what you need) The T slot table surface is ideal for fixturing robots, cobots, part feeders, test rigs, wiring systems and many other industrial applications- quick and easy and no drilling and tapping required. If you need to reposition or adjust, just loosen the bolts, slide it over and retighten and you are done. The tables are available with either height adjustable pedestal feet or rolling casters. There is even an optional lower shelf. The table surface is made from our 40x250 RE series extrusion. This extrusion is 250mm (9.8") wide so the table top is rigid. The extrusion is machined flat on both sides so you have both a level and flat surface to mount to. Table length can be custom ordered to lengths up to 3m. Table depths are available in increments of 250mm. Tables are also available with the PT 25 20x250 extrusion for a solid extrusion top with T Slots. 
Click here for CUSTOM SIZED Industrial Workbenches and tell us what you need - EVEN MULTILEVEL!
Standard Sizes:
Back heights - 1250mm, 1500mm, 1750mm, 2000mm as measured from the floor
Table depths - 500mm, 750mm, 1000mm, 1250mm - each section is 250mm wide
Table lengths - 500mm to 3000mm in 500mm increments as standard -
CUSTOM LENGTHS AVAILABLE - tell us what you would like.

You can see the
standard versions of the model MT2 Industrial Workbench here.
You can see the
Industrial WORKBENCH WITHOUT A Back Panel here.
For a list of T Nuts and clamping accessories, see Robot Accessories and T-Nuts.
 

Have an Application Question? Ask Our Knowledgeable Engineers Today!

Contact Us