1 m - 16x16 mm Extrusion Enclosure Corner Profile

  • 16x16mm-Corner-Enclosure-Extrusion-Profile
Click image to enlarge
  • Just add aluminum side panels and make an enclosure of whatever size and length you need!
  • This enclosure profile is made of clear anodized extruded aluminum. 
2 Methods for Making Instant Enclosures:
Two slots are provided to insert 1.5 mm thick aluminum sheet stock or 1/16" aluminum sheet stock
Panels are held in place by End CAPS screwed into corner extrusion profile
Hardware set can be used to hold aluminum panels from 2 to 5mm thick against the extrusion (see photos) or .080"-.200" thick
END CAPS would finish the enclosure but would not be needed to hold clamped panels in place.
  • Channels in the profile corner are designed to be used with M5 self-tapping screws or tapped with an M5 thread for holding front and rear enclosure panels. 
  • This profile is used to construct enclosures for mechanical or electrical components.
  • Available in 1, 2 or 3 m lengths
  • We can custom cut to any length up to 3m for a small charge
  • Profile weight is .26Kg/m

Have an Application Question? Ask Our Knowledgeable Engineers Today!

Contact Us