Sub-header

Shell Profile Extrusion Enclosure

  • 28x110mm EUROCARD Shell Enclosure
  • 53x110mm EUROCARD Shell Enclosure Profile
Click image to enlarge
  • These extrusions mate with each other when flipped 180° to form a "shell"
  • A full enclosure requires a front and rear panel
  • The length is controlled by the length of the extrusion - up to 3m long.
  • Available in standard lengths of 1, 2 and 3m with custom cuts at $5/cut.
  • A built in card guide is designed to hold 1.6mm or 1/16" thick circuit boards with Eurocard widths of 100 mm.and any length
  • The enclosure is held together by the face plates which are screwed to the corners with M3 screws.
  • Enclosures with internal dimensions 100x40 mm can be made with 2 of the 28x110 mm profiles
  • Enclosures with internal dimensions 100x90 mm can be made with 2 of the 53x110 mm profiles
  • Enclosures with internal dimensions 100x65 mm can be made with 1 EACH of the 28x110 and 53x110 mm profiles
  • The exterior has a natural cooling design
Eurocard Extrusion Enclosure Dimensions
28x110 Shell Enclosure Profile Extrusion Cross Section
53x110 Shell Enclosure Profile Extrusion Cross Section
 

Have an Application Question? Ask Our Knowledgeable Engineers Today!

Contact Us